The welcome visits Shandong Hairui Zhonglian Pump Industry Co. , ltd. Website, the conduit pump that my company is a major produces manufacturer. When you need conduit pump type selecting, we will provide the before-sales service such as price of pump of conduit pump model, conduit, in order to offer your referenced alternative. This product information is the knowledge that about conduit pump platoon of a few kinds of typical breakdown consults:
When conduit pump is being installed, as a result of non-standard operation, may create all sorts of breakdown situations, below our specific aim exemple the breakdown condition that cites a few kinds of typical cases, give out all sorts of specific aim measure:
One, conduit pump is not bibulous
Phenomenon: The finger of pressure watch and vacuum meter is acuteness and jumpy.
Case study:
The water of 1. infuse pump is insufficient.
2. conduit and appearance are flat.
3. heart valve was not opened or had jammed.
Muscularity of 4. suction hose block or suction hose mesh jam.
5. bibulous height is too tall.
6. electromotor wrong wiring.
Solve measure:
1. is gone to afresh the affusion inside pump.
2. screws or jam flat place.
3. is checked and corrective heart valve or change heart valve.
4. changes suction hose or clean mesh.
5. reduces bibulous height.
Position of wiring of 6. exchange electromotor.
2, Conduit pumpDo not give water or flow is low
Phenomenon: (1) pressure watch has pressure. (2) discharge designs a requirement under water pump.
Case study:
1. gives conduit instruction too big or there is a foreign body inside the canal.
Impeller of 2. water pump jams.
3. seal ring has drawback.
Rotate speed of 4. water pump insufficient or direction of rotation is incorrect.
Solve measure:
1. is checked or shorten conduit, cleared eyewinker.
2. cleans water pump impeller.
3. changes seal ring.
4. examination, repair or change electromotor, make electromotor is turning.
3, conduit pump consumes power too big
Phenomenon: (1) electromotor is calorific. (2) overload of electromotor electric current.
Case study:
Gland of filling of 1. water pump case of too close, filling is calorific.
2. impeller has drawback.
Solve measure:
1. is adjusted loosen filling gland.
2. nap or change impeller.
Thank you to be mixed to the visit of above content very much read! This information is the introduction that about conduit pump platoon of a few kinds of typical breakdown checks, if you still want to have farther knowledge to this problem, or want to buy this relevant product, contact personnel of my company customer service directly please, my company returns production to suck pump oneself, welcome you at any time seek advice.